top of page

Smartgen Shipping Alarm And Monitoring System

Smartgen Shipping Main Machine, Generator Control, Operation, Alarm and Monitor scada System
( Certificate: CCS , BV )

For the main machine system;


Used with HMC 9000 s ship main engine control module;

AIN24 : 14 K-type, 5 PT100 inputs, 4 4mA-20mA current sensors inputs ,

DIN16A 16 channels digital input, CCS

DOUT16B 16 channels digital output, CCS

additional modules are used.

Features including main machine operation control command alarm sets are programmed into smartgen HMC9000S module . The HMC9000S module was transmitted to the scada screen over the RS 485 communication protocol and the Ship main engine Operation control alarm monitor system was realized. (Smartgen modules have a certificate of conformity to marine conditions. CCS / BV)

It is possible to configure the number of inputs and outputs.



Generator :


HMC6000A module is used for generator diesel machine control.

Diesel machine start stop remote control unit . All parameters have been adjusted in the HMC6000A in accordance with the temperature, pressure, exhaust temperature, cycle, machine transmission values ​​of the diesel machine. Diesel machine Operation control, command and safety set values ​​were set. All set values, analog and digit values ​​were sent to the SCADA system via the HMC6000A RS 485 communication protocol. In this way, Alarm and Monitoring system was realized.

(Smartgen modules have a certificate of conformity to marine conditions. CCS / BV) It is possible to configure the number of inputs and outputs.

Power in Numbers

Programs

Locations

Volunteers

Project Gallery

bottom of page